Specifications:
1) Models: TNCF5-300 / 400 / 500 / 600 / 700 / 800
2) Material width: 300 / 400 / 500 / 600 / 700 / 800mm
3) Material thickness: 0.6 - 6.0mm
4) Coil load: 3,000 / 5,000kg
5) Coil inner diameter: 508mm
6) Coil outer diameter: 1,200mm
7) Speed: 0 - 12m/min
8) Servo motor: AC 5.0 / 7.0kW
9) Inverse curve roll: lower 1 set
10) Work roll: upper 4 / lower 3
11) Expansion method: hydraulic
12) Uncoil method: master
13) Uncoil sensor: photo sensor
14) Uncoiler power: AC 1.5 / 2.2kW
15) Coil car: optional
16) Air hold down arm: standard
17) Feed level: 1,100 - 1,200

Features:
1) Feeding line can be easily adjusted by advanced worm gear screw jacks
device
2) The straightener can be opened for the cleaning of rolls
3) Thickness adjustment with 4 worm gear micro-adjuster by reading 0.1mm
advanced reference indicator
4) All rolls are made of bearing steel (SUJ2) and have all been quenched,
hard-chrome plated and ground with min. HRC 60 degrees
5) Uncoiler with inverter control and reference indicator adjuster
6) With out going catenary to assist and support the material
7) Power hold down arm device
8) Inverse curve roll easy to set up the curve or down curve feeding exit
direction
9) With electric eye loop control system
10) With threading table device
11) With coil side guide

Packing:
Wooden case